Location: / Lamps (Light Bulbs) / LED Bulbs / Colour Changing GU10 LED / Colour Changing LED GU10 Lamp Slave

Colour Changing LED GU10 Lamp Slave

Price £29.03£34.84 exc VAT

Quantity Discounts

Buy 10+ for £26.13£31.36 each

Product Information

Product Code: LED05RMTGU10-SLAVE

Colour Changing LED GU10 Slave Lamp

Slave GU10 colour changing LED lamp.
The slave colour changing lamp receives the signal from the master LED lamp not from the remote. See diagram at the bottom of this page.
Alternatively a DMX controller can used to colour change.
If multiple colour changing LEDs are required then 1x master and up to 32x slaves should be used.
Colour changing with 16 colours to select from using the remote control and master lamp supplied separately.
4 Selectable modes of operation flash, strobe, fade or smooth.
Mains voltage, no additional LED drivers required.
Can be retrofitted into existing halogen downlights.
This lamp can be used with fire rated downlights to create a unique colour changing fire rated downlight.

Specification

Description: Colour changing LED bulb.
Wattage: 5W
Equivalent to: 50W halogen
Beam angle: 30o
Life expectancy: 30,000 hours
Colour: 16 Colours using remote control
Voltage: 230/240V
Cap / base: GU10 / GZ10
Use with: Standard downlights. Or for fire rated downlights, see Icage.
Diameter: 51mm
Length: 70mm
Energy efficiency rating: A
Product code: LED05RMT-GU10-SLAVE
Dimmable: Yes, 4 step dimming
Supplied with remote control: No please order separately.

To install this colour changing LED GU10 lamp. You need to order one master and as many slaves as you want (up to 32 slaves per circuit). Each lamp must be fitted into a mains voltage GU10 downlight (supplied separately). Each lamp has an additional green and white wire, these wires must be wired in series so that the lamps are all linked. The wires are 400mm in length but can be easily extended using the extension cable available here. The remote control changes the master and the master instantly sends the signal to the slaves.