Expert HQ Rochdale: 16 - Select Options
Mean Well constant voltage 150W LED drivers with a 12V or 24V DC output. Rated at IP67 which means it's fully water and dust resistant. Ideal for use with LED tape. Over the years the Mean Well HLG range has proven to be highly reliable with almost 0% failure rate.
-
Features
Mean Well constant voltage 150W LED drivers with a 12V or 24V DC output. Rated at IP67 which means it's fully water and dust resistant. Ideal for use with LED tape and more other LED lighting products that require a constant voltage input.
Over the years the Mean Well HLG range has proven to be highly reliable with an almost 0% failure rate.
With a black and red output cable, you'll need an additional cable connector for wiring into LED strip tape, we recommend the 162 Series, which are a rewireable plug-in connector system that provides a secure and compact solution.
Key Features
- Mains voltage 230V input.
- Available with 12V or 24V DC outputs.
- Current ratings:
12V DC 12.5A
24V DC 6.3A - Wattage: 150W
- Non dimmable, we also have a wide range of mains dimmable LED drivers
- Suitable for use with 12V or 24V LED strips and other constant voltage LED lighting installations.
- This power supply is ideal for use under kitchen cabinets as it has mounting holes and can be screwed directly to the cabinets.
- Water and dust resistant to IP67
- Guarantee: 5 years
- Manufacturer: Mean Well
-
Specifications & Dimensions
Specifications Brand SpecificationsMean Well Dimensions Located Below Specifications Table Dimmable No IP Rating SpecificationsThis is the resistance to dust and moisture. The first digit is for the resistance to dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2.
An IP65 rating offers a higher resistance and is generally used outdoors.
An IP68 is fully water resistant and can be submersed in water, up to 1M in depth.
IP67 Operation Mode SpecificationsConstant voltage LED drivers have a 12V or 24V DC output voltage. They are mainly used to power LED tape and smaller LED light fittings.
Constant current LED drivers have a 350mA or 700mA output. They are used to power more specialised LED fittings that require a precise current.
Many other output voltages and currents are avaialble but these are the most popular examples.
Constant Voltage Product Type SpecificationsLED Driver Sku HLG-150H-**A Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
Warranty Specifications5 Years Wattage Specifications150 W - Length: 228mm
- Width: 68mm
- Depth: 38.8mm
- Length: 228mm
-
12 Reviews
-
Product Questions & Answers 1
Product Questions & Answers
I want to put a strip light around the edge of my pond (approximately 10m) and have seen the IP68 LED tape you do but wondered if you can confirm that this is safe in close proximity to the water and also confirm which accessories (driver, etc.) I will need.
Many thanks,
SimonQuestion by: Simon Essery on 19 Nov 2022, 18:23Yes, we have IP68 rated LED tape available here:
https://www.downlightsdirect.co.uk/ip68-led-tape.html
This is fully waterproof and can even be submersed under water.
The LED tape comes with a 1M input cable as standard, which can be extended.
at 14.4W per metre, this Mean Well driver will power up to 10M.Answer by: Chris Horridge (Admin) on 21 Nov 2022, 09:24 -
Product Codes
- HLG-150H-12A - 12V DC
- HLG-150H-24A - 24V DC