Location: / Lamps (Light Bulbs) / LED Bulbs / GU10 LED Bulbs / Philips MyVision GU10 LED Bulb 4W Non Dimmable

Philips MyVision GU10 LED Bulb 4W Non Dimmable

Price £8.96£10.75 exc VAT

Product Information

Product Code: PL/GU/4WLED

4W Philips MyVision GU10 LED Bulb Non Dimmable

The 4W Philips MyVision is an economy bulb, meaning you can get all the benefits of a reputable Philips LED at an affordable price. It acts as a direct replacement to your existing 35W halogen bulbs and can be fitted in any GU10 downlight or luminaire. This is down to the fact it is exactly the same size as a GU10 halogen bulb, but lasts up to 10 years longer (overall 11 year lifespan*) and saves you up to 90% in energy. This allows you to save money both on energy costs as well as replacement costs you would spend on halogen bulbs over the same LED lifespan.

*Calculated as 6 hours per day, 7 days per week in an open luminaire.

Technical Specification

Description: Philips 4W MyVision GU10 LED.
Wattage: 4W equivalent brightness to a 35W halogen.
Cap / base: GU10
Life expectancy: 25,000 hours.
Colour temperature: CCT: Extra warm white 2700K only.
Voltage: Mains 230/240v
Colour rendering index: 80 CRI
Lumen: 165 lm
Efficacy: 41.25 lm/w.
Beam angle: 40 degree.
Diameter: 50mm
Length: 56mm (halogens are 57mm).
Use with: Any GU10 downlight or GU10 luminaire.
Start up time: Instant
Manufacturer: Philips
Product code: PL/GU/4WLED
Dimmable: No, click here for the 4W dimmable version.
Energy efficiency rating: A
Guarantee: 3 years

Replacing your halogen bulbs? Follow these 4 easy steps...

1. Check your fitting - The Philips 4W MyVision will fit in any fitting where a halogen has been present, however it will only fit in a twist-lock GU10 base.

2. Check your current bulb - The Philips 4W MyVision is the equivalent brightness to a 35W halogen.

3. Order with confidence - Once you have chosen your downlight and bulb, you can order with confidence on our website. If you are unhappy with your product, we are happy to accept returns and offer refunds.

4. Replace - Once you have received your bulb, turn the switch that controls your lights to 'off', unscrew all your current fittings and replace with your new bulbs.

Follow this short guide if you are installing these bulbs as part of a new installation

1. Choose where your lights are going - If you require help with a lighting scheme for a new installation, email or phone for an expert quotation, where we can advise you on the number of light fittings you might require.

2. Choose your light fixture - Because of the Philips 4W MyVision's size, it will fit in any light fixture for a halogen bulb with a GU10 holder.

4. Fit the bulb and light fixture - Install your lighting fixtures/bulbs. If you have no prior experience with installing electrical equipment, seek the help of an experienced/qualified electrician.