This Danlers multi-functional controls is ideal for flush mounting through suspended or plasterboard ceilings. Programmable by Android phone (4.3 or later) or tablet via Bluetooth Smart. Easy to configure interface enabling greater energy saving, safety and security.
- Accurate ‘Real time’ clock with battery back up when powered off
- Accurately timed override ON or OFF
- Active or Passive PIR occupancy switching
- Patented ‘Intelligent’ photocell calibration
- Automatic Daylight Savings Time (BST) correction with offset adjustment
- Automatic Sunrise / Sunset prediction. This feature can be remotely adjusted via APP.
- Upload indicator to ensure successful programming.
- LED indicator for presence recognition within its detection range (can be turned off).
- Manual Group Control ON / OFF / RESUME feature on APP
Suitable for mains voltage 100 - 260Vac, 50Hz (switch mode).
Loading: 10 amp (2500W) of Resistive loads.
6 amp (1500W) of Fluorescent loads.
3 amp (750W) of Transformer loads.
Up to 2 amps (500W) of CFL, 2D lamps, LED Drivers and LED lamps and fittings.
- Minimum load: 2W resistive, suitable for most energy saving lamps, LED’s and emergency fittings.
- Detection range: 360 degrees with 8m diameter when mounted at a 2.4m ceiling height.
- Time Lag: 10 seconds to 23 hours 59 minutes 59 seconds
- Lux: Enabled: 30 to 1000 lux and infinite lux (photocell inactive).
Device: 85mm diameter x 79mm
Power Supply: 120 x 50 x 32mm
- Made in the UK
- Manufacturer: Danlers
- 5 Year warranty
- Product Code: CZCEFLP