Nottingham Depot: 225 - Select Options
Integral Constant Voltage 5 Multiport 24V Drivers
-
Features
Integral Constant Voltage 5 Multiport 24V Drivers
Key Features
- Available in wattage options: 24W and 36W
- Output current: 24W = 2000mA / 36W = 3000mA
- Dimming: With appropriate sensor
- IP rating: IP20
- Protection function: Short Circuit Protection, Overload Protection,
- Overheat Protection
- UK plug included
- EN: EN61347-1, EN61347-2-13
- LVD certified: Yes
- CE RoHS: Yes
- Voltage: 24V DC
- Input current: 24W = 0.16A / 36W = 0.22A
- Input voltage: 200-240V AC
- Material: Plastic shell
- Manufacturer: Integral LED
- Guarantee: 3 Years
-
Specifications & Dimensions
Specifications Brand SpecificationsIntegral LED Dimensions Located Below Specifications Table IP Rating SpecificationsThis is the resistance to dust and moisture. The first digit is for the resistance to dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2.
An IP65 rating offers a higher resistance and is generally used outdoors.
An IP68 is fully water resistant and can be submersed in water, up to 1M in depth.
IP20 Input Voltage Specifications230V AC Operation Mode SpecificationsConstant voltage LED drivers have a 12V or 24V DC output voltage. They are mainly used to power LED tape and smaller LED light fittings.
Constant current LED drivers have a 350mA or 700mA output. They are used to power more specialised LED fittings that require a precise current.
Many other output voltages and currents are avaialble but these are the most popular examples.
Constant Voltage Pack Rate SpecificationsMake a saving with our pack rate offers.
LED strips can be supplied in whichever lengths you want. If you order the 1M rate x 3, we will supply it as 1x 3M length. Or leave a comment in the checkout with your requirements and we'll supply the strips to your requirements.
Or contact us with your requirements at [email protected] and we'll send you a quotation.
1 Product Type SpecificationsLED Driver Sku ILDRCVA09*-24V Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
24V DC Warranty SpecificationsThe minimum guarantee period of this product.
3 Years Wattage SpecificationsWattage is the unit used to measure the rate of energy transfer or power consumption in an electrical circuit or device.
24W
- Length: 137mm
- Depth: 18mm
- Width: 54mm
36W
- Length: 149mm
- Depth: 18mm
- Width: 56mm
-
Reviews
-
Product Questions & Answers 2
Product Questions & Answers
Re the Integral Constant Voltage 5 Multiport 24V Driver 24W. Please confirm which cable terminals are required for the multiport connections. Are they JB4? If so, do you supply them? Many thanksQuestion by: Philip on 16 Jun 2023, 16:49I've uploaded an instruction sheet for these, which is located in the 'Data Sheets & Brochures' drop down.
These drivers are designed for use with Integral sensors shown in the left side page in this brochure link:
https://user-5zq6k5a.cld.bz/Integral-LED-Brochure-2023-Edition-12/131/
Let me know if you have any other questions. If you've got a specific LED in mind, we can advise on the best driver to use.
The JB4 connects are usually a term that Leyton Lighting use.Answer by: Chris Horridge (Admin) on 17 Jun 2023, 09:04Is this driver at 36w sufficient for this light strip at 3m
https://www.downlightsdirect.co.uk/cob-led-tape-16w-seamless-high-cri-priced-per-metre.htmlQuestion by: Dave on 7 Apr 2024, 15:04No, its not suitable. The COB tape is 15W/M, would be 45W.
Also, the COB tape doesn't have the same connectors as the multiport driver.Answer by: Chris Horridge (Admin) on 8 Apr 2024, 09:14 -
Product Codes
- ILDRCVA092 - 24W
- ILDRCVA093 - 36W