Nottingham Depot: 4402 - Select Options
Expert HQ Rochdale: 50 - Select Options
Integral EvoFire downlights for use larger hole sizes of 70-100mm. Available in a selection of finishes and with or without an insulation cover support bracket.
-
Features
Integral EvoFire downlights for use larger hole sizes of 70-100mm. Available in a selection of finishes and with or without an insulation cover support bracket.
The EvoFire series are fire rated and open rated GU10 downlights that improve heat dissipation for the LED inside.
The bigger hole size allows you to fit the downlight into existing holes without needing a separate hole converter plate.
Key Features
- Wattage: Maximum 10 watt (LED not included)
- Voltage: Mains 240V
- Cap type: GU10
- Position: Fixed
- IP Rating: IP65 suitable for use bathroom zones 1 and 2
- Finishes: Matt White, satin nickel and polished chrome.
- Dimmable when fitted with a dimmable LED GU10.
- Suitable for ceiling thickness's of 3mm to 30mm.
- Fire rated: Yes fully fire rated to 30, 60 and 90 minute ceiling types
- Tested in UKAS Accredited Lab
- Part E Compliant (acoustics)
- Supplied with push fit loop-in loop out terminal block terminal block holder and GU10 holder.
- Manufacturer: Integral Lighting
- Guarantee: 3 years
-
Specifications & Dimensions
Specifications Brand SpecificationsIntegral LED Cap Type GU10 Dimensions Located Below Specifications Table Dimmable LED Not Included Downlight Type SpecificationsBathroom (IP65) Finish SpecificationsChoosing the right finish or color for your downlights is crucial in achieving a harmonious interior design. For a cohesive aesthetic, consider coordinating the finish of your light fittings with that of your switches and sockets. Matt white remains the top choice for downlight finishes due to its universal appeal and it blends in with white ceilings.
Fire Rated SpecificationsFire-rated downlights are designed to preserve the fire resistance of ceilings by preventing fire spread through the cut-out spaces required for installing these recessed lighting fixtures.
Yes GTiN 5055788236481 IP Rating SpecificationsThis is the resistance to dust and moisture. The first digit is for the resistance to dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2.
An IP65 rating offers a higher resistance and is generally used outdoors.
An IP68 is fully water resistant and can be submersed in water, up to 1M in depth.
IP65 Insulation Coverable Lighting Technology Lamp Not Included Product Type SpecificationsGU10 Downlight Series SpecificationsThe sub-brand of a manufacturer that groups collections of products together.
Integral EvoFire Sku ILDLFR70D01* Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
230V AC Warranty Specifications3 Years Fire Rated Version
- Diameter: 112mm
- Cut out size: 70-100mm
- Depth: 38mm - A GU10 LED and holder will add further depth to this of up to 83mm.
Fire Rated & Insulation Coverable Version
- Diameter: 112mm
- Cut out size: 70-100mm
- Depth: 83mm
-
45 Reviews
-
Product Questions & Answers 8
Product Questions & Answers
Is this a Class 2 / double insulated light?Question by: James Peter Dawson-Goodey on 24 May 2022, 09:34Yes, the EvoFire is Class 2 / double insulated. This is some further information taken from the Integral website:
Yes when installed with a CE marked GU10 LED lamp.
Class II refers to the protection against electric shock. The Evofire is designed for LED lamps and all LED lamps have to comply with the relevant product standards for CE marking. These standards ensure the Lamp is suitable and safe for its identified supply connection. A GU10 LED lamp will be designed to connect to a Lamp holder supplying 240V mains supply into the lamp. The design of the lamp manages the supply to an equivalent level of electric shock protection as required for Class II.
So when the Evofire is fitted with a GU10 Led lamp built in accordance with the legally required standards it is protected to a Class II level for electric shock.
The Evofire is a fire rated lamp carrier. It only becomes a Luminaire when fitted with a relevant and compliant Light source. We state Class II on the packaging as when installed and fitted with an LED lamp the resulting system as a whole provides a Class II product.
If fitted with an MR16 lamp requiring a 12V supply the product would fall within Class III electric shock protection.Answer by: Chris Horridge (Admin) on 24 May 2022, 10:06Can thees be dimmed right down to almost off?Question by: Robb Saban on 6 Mar 2023, 15:21This is a GU10 downlight, which is like a car without an engine.
If you select a good quality dimmable GU10 with a good quality LED compatible dimmer switch you'll get a good range of dimming.
I'd recommend:
https://www.downlightsdirect.co.uk/philips-master-value-4-9w-gu10-led-dimmable.html
https://www.downlightsdirect.co.uk/varilight-v-pro.html
Or the best LED dimmer switch on the market is Lightwave:
https://www.downlightsdirect.co.uk/lightwave-rf-dimmer-switches-gen2.html
Also needs a hub:
https://www.downlightsdirect.co.uk/lightwave-rf-gen-2-link-plus-hub.html
Lightwave allows you to really fine tune the dimming results.Answer by: Chris Horridge (Admin) on 6 Mar 2023, 17:00Hi. Please can you advise if I can adapt this fitting to use a MR16 lamp holder ? I want to use it on a 12v DC system on a boat. Thank you, Andy BlackQuestion by: Andrew Black on 16 Aug 2023, 09:54Yes, you can do that using an MR16 holder:
https://www.downlightsdirect.co.uk/mr16-gu5-3-lamp-holder.html
Just be care with the MR16 LEDs that you're using as some operate on AC and its not always clear.
We also have some dedicated 12V DC downlights here:
https://www.downlightsdirect.co.uk/miniature-12v-downlight-malmbergs.html
Customers have used these on boats before.
But if you're powering them from a battery, you should also this:
https://www.downlightsdirect.co.uk/dc-dc-converter-12v.html
Answer by: Chris Horridge (Admin) on 16 Aug 2023, 10:23Do you have to take the light figment down to replace the bulb or can you replace institu. ThanksQuestion by: Russ on 28 Sep 2023, 12:41The fitting needs taking out and the lamp is removed from the rear.Answer by: Mathew Smith (Admin) on 28 Sep 2023, 15:04Do you have a similar product whereby the LED bulb can be changed without having to climb into the ceiling space to get to the back of the unit?Question by: Jim on 24 Oct 2023, 16:34This downlight has spring clips, so you can pull it out of the ceiling.
If you want more of a twist lock design, do you know which cut out size you're looking for and whether it needs to be IP65 (for bathrooms)?
You can also use the filters here:
https://www.downlightsdirect.co.uk/view-all-downlights.html
The icage has a wide cut out:
https://www.downlightsdirect.co.uk/ansell-icage-downlights-new.html#ansell-icage-downlights-new-15372pAnswer by: Chris Horridge (Admin) on 25 Oct 2023, 07:01 -
Product Codes
Fire Rated Versions
- ILDLFR70D015 - Matt White
- ILDLFR70D016 - Satin Nickel
- ILDLFR70D021 - Chrome
Fire Rated & Insulation Coverable Versions
- ILDLFR70D013 - Matt White
- ILDLFR70D014 - Satin Nickel
- ILDLFR70D020 - Chrome