Higher output LED strip tape that has a 12W per metre energy consumption. The higher lumen version produces 910 to 1000 lumens per metre. Providing as bright, seamless lighting effect that is similar to a fluorescent.

This LED tape has SMD2835 LED chips, with 60 LEDs per metre and requires a 24V DC supply.

To offer this product at the most competitive rate, it is available in 5 metre pack quantities unlike our other LED tapes that are available by the metre. Available in a choice of warm white 3000K or daylight 6500K colour temperatures.

The self adhesive backing allows it to be stuck to most surfaces or it can be fitted into an aluminium profile rails to increase heat dissipation and to provide a more complete finish. Supplied in a 5 metre pack that includes a solder-less fast connector that allows you to cut the tape at the cut points and re-connect without having to solder.

Although this is supplied in a 5 metre pack, because it is 24V you can combine two 5 metres lengths together to create a run of up to 10 metres without worrying about volt drop. This can be done by using the solder-less connectors supplied or be soldering the strips together.

Specification

• Wattage: 12W per metre with 60 LEDs per metre.
• Colour temperatures and lumens: 
  - 3000K Warm white at 910 per metre
  - 6500K Daylight at 1000 per metre
• Voltage: 24V DC - Separate power supply required.
  
• LED chip type: SMD2835
  
• Beam angle: 115 degrees
  
• CRI: 80
• Dimmable with a triac dimmable LED driver.
  
• Fitted with 200mm of input cable with a red and black core.
  
• Life expectancy: 13,000 hours
  
• Guarantee: 3 years
  
• IP Ratings: IP33 - slight resistance to dust and water
  
• Approvals: RoHS, CE and FCC.
  
• Manufacturer: Integral LED Lighting
  

• Width: 10mm
  
• Height: 2mm
  
• Cut points are every 100mm
  
• Reel length: 5M
  

3000K Data Sheet

6500K Data Sheet

• ILSTWHIA054E - Warm white 3000K
  
• ILSTWHIA055E - Daylight 6500K