Mains Dimmable LED Drivers 150W
Expert HQ Rochdale: 3 - Select Options
Mains dimmable 150W LED drivers that are suitable for powering larger runs of LED strip tape. Rated at IP66, they're constructed from a robust aluminium casing and are built to last.
-
Features
Mains dimmable 150W LED drivers that are suitable for powering larger runs of LED strip tape. Rated at IP66, they're constructed from a robust aluminium casing and are built to last.
Ideal for use with LED strip tape but can be used with many other constant voltage LED lights, they're compatible with leading edge and trailing edge dimmer types.
Key Features
- Available in output voltage options:
- 12V DC
- 24V DC - Built-in active PFC function
- Efficiency up to 87%
- Full protection aluminium housing
- Cooling by free air convection
- Suitable for LED lighting and moving signs
- TRIAC / mains dimmable: Leading & Trailing edge compatible
- Wattage: 150W
- IP rating: IP66
- Protections: Short circuit/ Over Loading/ Over Current
- Frequency range: 47-63Hz
- Output current: 12.5A = 12V DC / 6.25A = 24V DC
- Input voltage: 200-240VAC
- Manufacturer: Ecopac
- Guarantee: 3 years
- Available in output voltage options:
-
Specifications & Dimensions
Specifications Brand Ecopac Power Dimensions Located Below Specifications Table Dimmable Yes IP Rating SpecificationsThis is the resistance to dust and moisture. The first digit is for the resistance to dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2.
An IP65 rating offers a higher resistance and is generally used outdoors.
An IP68 is fully water resistant and can be submersed in water, up to 1M in depth.
IP66 Input Voltage 230V AC Operation Mode SpecificationsConstant voltage LED drivers have a 12V or 24V DC output voltage. They are mainly used to power LED tape and smaller LED light fittings.
Constant current LED drivers have a 350mA or 700mA output. They are used to power more specialised LED fittings that require a precise current.
Many other output voltages and currents are avaialble but these are the most popular examples.
Constant Voltage Output Voltage SpecificationsLED drivers have an input and output voltage. The input voltage is usually mains voltage (230V AC) and the output voltage is usually 12V or 24V DC.
Constant voltage LED drivers are regulalry used with LED tape and have a constant, regulated voltage.
Product Type LED Driver Sku ELED-150P-**T Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
230V AC Warranty SpecificationsThe minimum guarantee period of this product.
3 Years Wattage SpecificationsWattage is the unit used to measure the rate of energy transfer or power consumption in an electrical circuit or device.
150 W -
1 Review
-
Product Questions & Answers 2
Product Questions & Answers
Can the DC output of this driver power up two LED tapes in parallel? Each LED tape is 7m long.Question by: David on 12 Sep 2022, 16:34Yes, that's fine. We've got some neat little connectors you could use for this:
1x distribution block:
https://www.downlightsdirect.co.uk/distribution-block-6-way-162-series.html
3x (1 for the driver to the block and 1 per LED tape)
https://www.downlightsdirect.co.uk/rewireable-connector-plug-socket-162-series.html
Or basic strip connectors could be used.Answer by: Chris Horridge (Admin) on 12 Sep 2022, 16:39Do you have a multi-way distribution block for this driver? I can't see one on this websiteQuestion by: Chris Cusse on 16 May 2024, 15:12We don't I'm afraid, you'd be best using a choc box/junction box.Answer by: Mathew Smith (Admin) on 17 May 2024, 14:10 -
Product Codes
- ELED-150P-12T - 12V DC
- ELED-150P-24T - 24V DC