Plaster-In profile rail for use with LED tape that offers a trim-less effect. Suitable for use with LED tape that has a maximum width of 10mm. It offers a minimal lighting effect, the only thing that is visible is an array of light.
- Plaster-in profile rail for use with LED strips.
- Provides added protection and a more elegant finish for LED strip tapes.
- Suitable for use with all LED Strip Fit and other LED tapes which are 10mm wide.
- End caps supplied.
- No mounting brackets required as the extrusion rail mounts inside a wall or ceiling.
- Length: Priced per metre. Stocked in 2 metre lengths but available to cut.
- Longer runs can be easily constructed by combining lengths together.
- Rails can be supplied pre-cut to any length required. Please contact us to discuss your requirements.
- Please note that LED strips have cut points every 50mm (for 60 LED / metre) or 100mm (for 30 LED / metre).
- Product code: TRIM-RAIL
Aluminium profile rails can be supplied on their own or as complete fittings with LED tape fitted to any length or specification you desire. For lengths longer than 2 metres, we recommend butting the rails together to form a continuous run. Our made up profile rails can include end caps and connecting cables. Please contact us for more information on: 01706 521188, or email: [email protected]