RF Receiver For Single & Multi Zone Control

RF (Radio Frequency) receiver that allows control over single or multiple zones using one remote control device (SR-2858Z4 or SR-2858Z8). Up to 8 separate zones can be controlled using multiple receivers without having to run a cable between each zone.

Choose constant voltage version for use with LED tape. Ideal for use when runs are located in different areas or when a connecting cable cannot be used to join them. Suitable for use with 12-36V DC supply voltages.

Constant current version is suitable for use with LED ground lights and LEDs that require a 350ma or 700ma supply. Constant current is not generally used with LED tape which is constant voltage. These reeievers require a constant voltage input which is converted into a constant current output.

You can even use a constant voltage receiver and a constant current reciever on the same system and still control them both from the same remote control.

Key Features

• RF receiver has a range of 20 metres.
• We also offer a Wi-Fi version which can be controlled through an Iphone or Android App (SR-1009FAWi for single zone use).
• Alternatively by adding the RF to Wi-Fi hub (SR-2818WIN) you can control multiple RF receivers using an iPhone or Android smart phone.
• Receivers can be set to slave or master.
• Can also be used instead of an amplifier.
• Allows multi zone controlling of up to 8 zones using 1 controller.
• For use with RGB or RGBWW (red, green, blue & warm white) LED strip lights, or our own RGB LED downlights and LED plinth lights. Can also be used with single colour LED lights.
• 12V supply 60W per channel, 180W for 3 channel (RGB).
• 24V supply 120W per channel, 360W for 3 channel (RGB).
• Output voltage: 12V to 36V DC.
• Brand: LED StripFit
• Guarantee: 3 years