Mains Dimmable LED Drivers 60W
Expert HQ Rochdale: 7 - Select Options
Triac dimmable constant voltage LED drivers 60W, that are available in 12V or 24V versions. Ideal for use with LED strip tape and many other constant voltage LED products.
-
Features
Mains dimmable constant voltage LED drivers 60W, that are available in 12V or 24V versions. Ideal for use with LED strip tape and many other constant voltage LED products.
Compatible with both leading edge and trailing edge dimming modes.
Key Features
- Available in output voltage options:
- 12V
- 24V - Cooling by free air convection
- 85% efficiency
- Full protection plastic housing easy installation
- Built-in active PFC function
- Protections: Short circuit/ Over loading/Over current/ Over temperature
- Wattage: 60W
- IP rating: IP20
- Dimmable: Yes
- Working temperature: -20~+45 degree C (Refer to derating curve), +85 degree C (max case temp.)
- Output current: 12V = 5A / 24V = 2.5A
- Input frequency: 47-63Hz
- Input voltage: 200-240V AC
- Manufacturer: Ecopac
- Guarantee: 3 years
- Available in output voltage options:
-
Specifications & Dimensions
Specifications Brand SpecificationsEcopac Power Dimensions Located Below Specifications Table Dimmable Yes IP Rating SpecificationsThis is the resistance to dust and moisture. The first digit is for the resistance to dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2.
An IP65 rating offers a higher resistance and is generally used outdoors.
An IP68 is fully water resistant and can be submersed in water, up to 1M in depth.
IP20 Input Voltage Specifications230V AC Operation Mode SpecificationsConstant voltage LED drivers have a 12V or 24V DC output voltage. They are mainly used to power LED tape and smaller LED light fittings.
Constant current LED drivers have a 350mA or 700mA output. They are used to power more specialised LED fittings that require a precise current.
Many other output voltages and currents are avaialble but these are the most popular examples.
Constant Voltage Output Voltage SpecificationsLED drivers have an input and output voltage. The input voltage is usually mains voltage (230V AC) and the output voltage is usually 12V or 24V DC.
Constant voltage LED drivers are regulalry used with LED tape and have a constant, regulated voltage.
Product Type SpecificationsLED Driver Sku ELED-60P-**T Warranty SpecificationsThe minimum guarantee period of this product.
3 Years Wattage SpecificationsWattage is the unit used to measure the rate of energy transfer or power consumption in an electrical circuit or device.
60 W - Length: 178mm
- Width: 61mm
- Height: 24mm
-
Reviews
-
Product Questions & Answers 2
Product Questions & Answers
Can I use a dimmer on the 240v input to dim the 10v dc outputQuestion by: Mike on 10 Nov 2022, 15:10These drivers are available with 12V DC or 24V DC outputs. What light are you dimming that requires 10V DC? Its quite an odd output, so I'd like to double check as we'd need something else.Answer by: Chris Horridge (Admin) on 11 Nov 2022, 07:42Can I use this to run/control an 8 meter LED strip? Also could this run off a 2nd 6 meter LED strip? Or would I need an additional dimmable unit? ThanksQuestion by: James on 2 Apr 2024, 23:01This driver is rated at 60W. It depends on the wattage per metre of the LED strip(s) you're connecting.
We've got some tables for our LED strips that show which drivers to use, with each run length:
https://www.downlightsdirect.co.uk/high-efficiency-led-led-tape-smd2835.html
or:
https://www.downlightsdirect.co.uk/cob-led-tape-16w-seamless-high-cri-priced-per-metre.html
We've also got a contact form on those pages, if you fill in the form with your information we can recommend all of the correct components and provide you with a quotation.
Answer by: Chris Horridge (Admin) on 3 Apr 2024, 07:52 -
Product Codes
- ELED-60P-12T - 12V Output Voltage
- ELED-60P-24T - 24V Output Voltage