Varilight Multi-Point Slave Dimmer Switch

Varilight Multi-Point slave dimmer switches must be used with the Multi-Point master and will not work on their own. Slaves allow 2 way or even 3 way dimming. This means you could dim the same light from multiple locations.

Simply install a standard Multi-Point master dimmer switch then add a slave to the circuit. For 3 way dimming just add another slave.

Key Features

• Available in 1, 2, 3 or 4 gang options.
• 1 way or 2 way operation. For 2 way dimming add a slave dimmer.
• With soft start and automatic overload protection.
• Masters and supplementary controllers available as separate purchases for maximum flexibility
• Retrofit with standard 3 core and earth wiring
• Can reprogrammed to adapt to different lighting circuits by pressing your finger on the button for 12 seconds.
• Smoother, silent dimming operation, no buzzing.
• Fits onto a 25mm back box. 1 and 2 gang fit onto a single and 3 and 4 gang onto a double.
• Manufacturer: Varilight
• Guarantee: 10 Yearss

Dimming Capabilities

• For full loading information see the instructions from the data sheets tab.
• Maximum LED loading: 
  - 1 gang 1x 100W
  - 2 gang 2x 100W
  - 3 gang 3x 100W
  - 4 gang 4x 100W
• LED loads vary from make to make we always recommend using quality branded LEDs such as Philips. Integral or Aurora.
• Recommend loading capabilities of 1-10 LED lamps or 100W per switch. This is not set in stone and varies from LED to LED.