The new and improved Wi-Fi control hub allows you to control LED tape and other LED lights via a smart. This latest version is now easier to install and can be connected directly to your home router.
Requires additional SR-1009FA receivers which need to be wired into the LED tape. Allows multiple RF (radio frequency) receivers to be controlled from one control device using the Easy Lighting App which is free to download. Recommended for use in applications where multiple Wi-Fi zones are required. For single Wi-Fi zones we have the SR-1009FAWi which has built in Wi-Fi capabilities.
Can also be used with constant current LED lights such as ground lights and also you to control a mixture of LED tape and ground lights from the same device.
Specification
Wiring Example
The image below shows a typical installation when used with 2x SR-1009FA receivers (ordered separately). More can be used.
[Click on the image above to view the instructions]
Easy Lighting App
The Easy Lighting App is free to download and will allow you to control your LED lights without interrupting your Wi-Fi connection meaning you can still browse the web without have to switch Wi-Fi connections. The App is easy to use and allows you to take photos of your zones and name them.
Once each zone is set up by linking them with the learning button on the SR-1009FA RF receivers you can control each zone independently or simultaneously by toggling them.
App seems a bit flakey and says its disconnected when it isn't.
Have the hub located in my shed connected to a powerline adapter to operate garden lights as the rf remote would work through my glass doors, this works perfectly.
