Leading edge dimmer switch grid module that can be used in grid systems. Enables dimming of LED and CFL lighting loads. Supplied as a dimmer grid module and must be used in a grid system using the appropriate adaptor. Similar to the MP500 but is supplied with grid mounting modules including MK, Crabtree, Wandsworth, Hamilton, Deta, GET and MEM. Many others available on request.

The GRID500 is fitted with a minimum adjustment dial that provides a wider range of dimming for LED or CFL lights. Compatible with most types of dimmable LED bulbs and LED downlights. If you want to dim 1 or 2 lights the adjustment dial would turned down to its lowest setting.

When dimming a larger number of LED lights the dial would be turned up to its highest setting. The more LED lights that are used reduces the dimming range, for example dimming 15+ LEDs may only dim the lights to 70%. Whereas dimming 10x LEDs would dim the lights to less than 10%.

Specification

• 1 Gang 1 way or 2 way operation.
  
• Control knob has push on / off function.
  
• Control knob is in white, can be supplied in other colours on request and interchanged with any other D shaped knobs.
  
• With soft start and automatic overload protection.
  
• Contains leading edge technology.
  
• Manufacturer: Zano Lighting Controls (formally Richmond Lighting).
  
• Product code: GRID500 (ZGRID500) (DMGRID500)

Dimming Capabilities

• Halogen and incandescent: Minimum: 40W / Maximum: 500W mains or 400W LV.
  
• CFL:  Minimum: 12W / Maximum: 66W.
  
• LED: LED loads vary from make to make:
  
• Philips 7W Master: 1 to 15. Will dim more but dimming range is reduced.
  
• Halers H2 Pro LED downlights: 1 to 10.