Lightwave RF Gen2 dimmer switches allow you to control your lights from a smart phone, tablet or PC. Via the Lightwave Link Plus which an additional item, you set timer programs, or switch and dim your lights from anywhere in the world.

Now available in 1 or 2 gang versions as well as the recently added 3 and 4 gang versions. 

Suitable for new or existing installations, Lightwave dimmer switches can be used as a retrofit solution for standard light or dimmer switches. They require a 35mm back box but are now supplied with a 10mm spacer block which allows them to fit into 25mm back boxes. They must be used with dimmable lamps.

These wired dimmer switches are wired into a lighting circuit in the same way as standard light switches and dimmer switch are. They can also do 2 way or 3 way dimming which means you can dim the same lighting circuit from 2 or more switches (or locations from the room). This requires the Link Plus App for programming.

Specification

• Finishes: Stainless steel or white metal.
• Available in 1, 2, 3 and 4 gang versions.
• Voltage: Mains 230V
• Loading: Maximum wattage for LED is 70W or 350W for incandescent
• Radio Frequency: 433.9.Mhz
• Dimmable: Yes, suitable for dimming LED lights. For GU10 LEDs we recommend the Aurora Enlite 5W GU10 LED and for integrated LED downlights go for the Aurora MPRO or Aurora M10.
• Guarantee: 3 years
• Manufacturer: Lightwave RF

Wired 1 & 2 Gang Plates 

• Height: 88mm
• Width: 88mm
• Depth: 28mm - Now includes a 10mm spacer allowing the dimmers to fit onto 25mm back boxes. 
  For new installations we recommend fitting them onto 35mm back boxes and not using the spacer.

Consumer Brochure Available Below:

1 Gang

• L21 - Stainless Steel 
• L21WH - White Metal 

2 Gang

• L22 - Stainless Steel 
• L22WH - White Metal 

1 Gang

• L21 - Stainless Steel 
  
• L21WH - White Metal 
  

2 Gang

• L22 - Stainless Steel 
  
• L22WH - White Metal 
  

3 Gang

• L23 - Stainless Steel
  
• L23WH - White Metal