Danlers Wall Occupancy Switch 2 Wire 6A

15 In Stock | More Available In Usually 2-3 days
SKU
WAPIR
Per Each
£66.56 Incl. VAT

Danlers Wall Occupancy Switch 2 Wire 6A

  • Features

    Danlers Wall Occupancy Switch 2 Wire 6A

    The WAPIR model replaces an existing wall switch - no neutral wire is needed. It fits into a plaster depth (16mm) wall box. The WAPIR model also has a manual override off switch on the front of the plate.

    Applications

    The WAPIR requires a permanent live supply and should only be used in applications where the lights would not be on for more than 12 hours per day. This is to allow its rechargeable battery enough time to recharge itself from the mains supply. The WAPIR is supplied with a load capacitor to augment small loads.

    The WAPIR is suitable for small offices, meeting rooms, tutoring rooms, etc.

    The override off button (out position) enables the lights to be held off during video presentations, etc. 

    For wall mounting only.

    Key Features

    • Detection angle: 120 degrees
    • Time lag range: 10 seconds to 40 minutes in 9 steps.
    • Photocell range: 100 to 1000 lux, and inactive.
    • Maximum load:
      Up to 6 amps (1500W) of resistive, transformer or fluorescent lighting loads.
      2 amps (500W) of low energy lighting loads (LED lamps and compact fluorescent).
      Or up to 1 amp (250W) of fans or most metal halide lamps.
    • Minimum load: 40W resistive or approximately 100W inductive per WAPIR in the circuit.
    • Made in the UK
    • 5 Year warranty.
    • Product Code: WAPIR
    • Manufacturer: Danlers
  • Specifications
    Specifications
    SKU WAPIR
    Product Type PIR Lighting Sensor
    GTiN 0631112927048
    Brand Danlers
    Warranty 5 Years
  • Reviews
  • Downloads
    Product Attachments
    Instructions wapir-installation.pdf
  • Dimensions

    • Height: 86mm
    • Width: 86mm
    • Depth: 22mm
    • Wall box depth: 16mm