RGB Colour Changing LED Light Module for Downlights

RGB colour changing LED light module for use in downlights. Fits in most GU10 downlights as it has the same diameter of 50mm. Requires a 350ma input which involves some rewiring of a GU10 downlight. Recommended for use in open rated downlights such as the Ansell iCage, Ansell Edge, Aurora EFD Pro or Integral EvoFire. Can also be used in wall lights and other MR16/GU10 light fittings.

With a 9W energy consumption, it offers a bright colour changing lighting effect. With 3x 3W full colour RGB (red, green and blue) LED chips it is able to produce a multitude of colour effects.

Key Features

• Wattage: 9W
• Voltage/current: 350mA
• Edison LED chip with 3x3W LEDs
• Lumen output: 66lm Red, 135lm Green, 27lm Blue
• Material: Aluminium
• IP rating: IP40
• Beam angle: 45 degrees
• Cable length: 1M input and 1M output
• CE approved
• Guarantee: 3 years
• Product code: LED09RGB

How to Order

This RGB LED light is a type of lamp that be fitted into a recessed downlight, it is a similar size to a GU10 50W halogen. It is slightly deeper at 55mm. It has an input an output connector with a cable length of 1M. The first light will need to be wired into an RGB controller that has a 350ma output such as our SR-1009FA3 receiver, when this is connected to an LED driver, it will provide the power and control capabilities to the light. If you want to connect more lights you can then simply plug the next light into this using the connectors provided.

For powering 2 lights with 1 receiver you need a 24V LED driver (LPV-20-24 ). For powering 4 lights with 1 receiver you need a 48V LED driver (LPV-60-48). If more lights are required you can add another receiver which can be set as a slave, then add more LED drivers.

A controller will then be required to allow you to change colour effects and dim the brightness. This could be in the form of a handheld controller, wall controller or Wi-Fi hub. Each or all of three of these items can be used with the SR-1009FA3 receiver.

DMX - Wired

Or for a wired in version you can use a 350ma DMX driver. If you select a 24V driver with model: LPV-20-24 it will power up to 2 RGB lights per 1 DMX driver. DMX control allows you to operate different types of lights from one control system.