Danlers Resistive Load 10W

Danlers RESLOAD is a resistive load that adds a dummy load onto an LED lighting circuit allowing a flicker free, smooth dimming performance of LED lights. This easy to install products allows a wider range of LED lights to be dimmed used various dimmer switches and lighting control systems.

It is only required in specific circumstances such as when you want to dim GU10 LEDs with the Lutron Rania range of dimmer switches. The RESLOAD not only adds additional wattage to the circuit but when wired in series directly after the dimmer switch it tricks the dimmer into thinking it's dimming a conventional light source such as halogen or incandescent and dims the LEDs in the same way as it normally would.

Specification

• Ideal for use with Lutron Rania allows GU10 LEDs to be dimmed without flicker.
  
• Can be used to provide a dummy load to a lighting circuit to prevent flickering effect. 
  
• Can be used with dimmable LEDs such as GU10s and integrated LED downlights.
  
• Solves minimum load issues.
  
• Allows LED lights to be dimmed down to lower levels.
  
• Rated at 10W
  
• Can be used with many dimmer types including Danlers trailing edge dimmer module. Click here.
  
• Manufactuter: Danlers
  
• Product code: RESLOADE / (replaces RESLOAD)

• Length: 130mm
  
• Diameter: 60mm
  

Installation Instructions