LED Strip RGB & CCT 60 LEDs /M 24W High Output (Priced Per Metre)

The ultimate in LED tape, a combined RGB (colour changing) and CCT adjustable LED strip tape. Unleashing the full colour spectrum of red, green and blue with colour temperature adjustable effects in 1 LED tape. The colour temperature can be adjusted from an ultra warm 2400K to daylight 6500K and anything in-between.

LED lighting has come a long way over the years and I'm not sure how this product can be bettered? It has it all. You can have a primary colour like red, a warm white colour temperature, or a mixture of both at the same time. This is a superior LED tape to RGBW and RGBWW.

It can be used for mood lighting effects and for ambient lighting by switching the colours with a remote control (required separately). At 24W per metre it offers a high luminosity of 1130 lumens per metre and is IP65 rated. With a thin width of 12mm, its suitable for use in a variety of aluminium profile rails including our LEDSTAPTHIN rail.

With an industry new 5 in 1 LED chip shown below, which is made up of red, green, blue, 2400K and 6500K. This is a technologically advanced product that requires a technologically advanced controller that has 5 channels for the 6 wire requirement of the tape (see SR-2858Z4-5C for remote and SR-1009EA-5C for the receiver). Using the system you can control individual or multiple runs all from the same remote control.

The single row design is self adhesive, helping to make installations much easier and allowing it to be installed in large selection of aluminium profile rails.

To get the best use out of this RGBWW light strip we recommend using it with one our new LED controllers, they come as standard with the usual RGB buttons but also with a W button for warm white control. Using a combination of these buttons allows you to mix the colours and enables you to create unique shades of oranges and pinks etc not usually found with traditional RGB.

Another reason for using RGBWW LED strip is that if you ever get bored of the reds and blues etc you can switch to a cleaner, true warm white at the touch of a button.

Key Features

• LEDs per metre: 60, featuring an advanced 5 in 1 LED chip.
• Priced per metre
• Wattage: 24W watt per metre
• Colour temperature: RGB (colour changing) and CCT (correlated colour temperature) with a range of 2400K to 6500K. 
• Additional controller required see SR-1009EA-5C receiver with the SR-2858Z4-5C remote control. 
• Voltage: 24V DC (additional power supply also required). CLICK here. To specify the correct driver multiply the wattage per metre which is 24W by the total metres. For example a 5 metre run would be 120W so we would recommend the Mean Well HLG-150H-24A which would actually power up to 6.2M or the Mean Well HLG-240H-24A which will power up to 10 metres.
• If in doubt, or for bulk quotations please contact us at: [email protected] or call: 01706 521188
• Lumen: 1130 lumens per metre
• Efficacy: 47 lumens per watt
• LED type: SMD5060 5 in 1 LED chip.
• Beam angle: 120 degrees
•  CRI: 80
• Cut points: Every 100mm
• 6 wires, additional cable can be ordered separatley.
• Water resistant: Yes rated at IP65, encapsulated in resin.
• Self adhesive backing.
• Approvals: RoHS, CE and FCC.
• Brand: LED Strip Fit
• Life expectancy: 50,000 hours
• Guarantee: 3 years
• Product code: LEDSTRGBCCT