Varilight Multi-Point Touch Dimmer Switch

Varilight mult-point touch dimmer switches are suitable for dimming LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with halogen and incandescent. Unlike conventional rotary dimmer switches (see V-Pro), the multi point range is remote controllable.

Formally known as Eclique 2, Varilight's multi-point range no longer has a singular touch button, it has designated up and down buttons for improved lighting control. They are very easy to use and can also be controlled using the Varilight controllers; YRC8 or the new YRE8. They can also be programmed to be controlled using your Sky TV remote.

Dimmer switches not only give you complete control over your lighting ambiance but also reduce energy costs and allow your lamps to last even longer. Available in a number of finishes in a modern screw-less flat plate design.

Another advantage of the Multi-point series is that it allows 2 way, 3 way or multiple way dimming options. This means you could dim the same light from multiple locations. Simply install a standard master dimmer switch then add a slave to the circuit. For 3 way dimming just add another slave.

Key Features

• Available in 1, 2, 3 or 4 gang options.
• 1 way or 2 way operation. For 2 way dimming you need to add an Eclique slave dimmer as it won't work with a normal 2 way light switch.
• With soft start and automatic overload protection.
• Retrofit with standard 3 core and earth wiring
• Choose a Multi-Point Remote master dimmer for enhanced control, including LightScene
• Can reprogrammed to adapt to different lighting circuits by pressing your finger on the button for 12 seconds.
• Smoother, silent dimming operation, no buzzing.
• Fits onto a 25mm back box. 1 and 2 gang fit onto a single and 3 and 4 gang onto a double.
• With both leading edge and trailing edge dimming outputs. Can be programmed to meet the demands of most LEDs.
• Manufacturer: Varilight
• Guarantee: 10 Year

Dimming Capabilities

• For full loading information see the instructions from the data sheets tab.
• Maximum LED loading:
  - 1 gang 1x 100W
  - 2 gang 2x 100W
  - 3 gang 3x 100W
  - 4 gang 4x 100W
• LED loads vary from make to make we always recommend using quality branded LEDs such as Philips. Integral or Aurora.
• Recommend loading capabilities of 1-10 LED lamps or 100W per switch. This is not set in stone and varies from LED to LED.