Customer Case Studies

We fitted 3 Ansell outdoor adjustable downlights to a new storm canopy built at the front of the property. They have been fitted with 6W LED bulbs for energy saving.

When I started working at Downlights Direct I knew nothing about RGB lighting, but after a year of seeing various types of lighting my mind was set on making my bedroom a nice place to relax in by using RGB lighting.

I wanted to install some new downlights in my bathroom with dimmable energy efficient LED bulbs, but due to having insulation in the ceiling space I had to go for Insulation Coverable Downlights. After appreciated help and advice from the Downlights Direct team I was recommended the Aurora Insulation Coverable Downlights with the Philips 6W LED GU10 in a Warm White 3000K colour temperature. The bulb gives a bright lovely dimmable light, and blends with the white finish of the downlight and room colour.

The project entailed updating our bathroom with a new light fitting but instead of keeping the existing pull switch, I wanted to install a non touch sensor type switch. Some PIR detectors have a large sensor range or worked to a timer, those were not suitable for my application as the door is close to the area I needed the switch and the timer would mean the lights would be on too long or not long enough.

The area of my front garden near the front door has always been very dark spot in the evenings. Not only did I want to have lighting to make it easier when looking for door keys, I also wanted to add more lighting to add a little more in the way of security as advised by many authorities including our local Police force.

Find out what Mr Fernandes did using Lutron Lighting Controls with some RGB colour changing lights.

Deben Joinery wanted to install some RGB strip under a pane of glass for ambient bar lighting, to allow the customer to get a nice colorful effect whilst enjoying drinks.

I needed to fit LED lights in a sloping ceiling over the cooker to provide light over the kitchen work surfaces.

We were asked if we could make a dining table with a twist, so quite quickly we had the idea to come up with a table that lights up. We thought it would be fun if the light came from underneath rather than the top. After realizing LED light is probably the way forward, we got in touch with Downlights Direct.

I replaced existing GU50 spotlights which had burnt as the surrounding insulation caused existing units to overheat and pose a fire risk.