LED RGB (red, green, blue) wall controllers which are available in 3 output types; DMX which requires an additional DMX driver, RF / Wi-Fi version which requires an additional receiver but operates wire-lessly from the LED strip and PWM (pulse width modulation) version which requires no additional receivers or drivers. Please see diagrams for connection types or contact us to discuss.
This range of LED wall controllers are easy to use and allows colours to be changed through the colour wheel. Ideal for use when a stationary wall mounted controller is required. The RF version can be used as well as a hand held remote control see SR-2818.
PWM Specification (SR-2811PWM)
DMX Specification (SR-2811WDMX single zone or SR-2812WDMX 4 zone)
RF / Wi-Fi Specification (SR-2820)
Q1) Which one should I choose?
A1) If your installation is simple and short (around 10 metres) then go for the PWM version as it doesn't require an additional DMX driver or receiver which costs less. It's easier to wire and easier to use.
Q2) I only have a 230V supply for the wall controller as I'm replacing a light switch, what do I do?
A3) The SR-2820 wall controller is now mains voltage. It then works wire-less from the receiver.
Q3) What is the longest length of LED strip I can run off them?
A3) By adding more amplifiers and drivers you can go infinitely.
The controller was used with standard colour RGB led lights so had a spare channel (White). Controller works well & looked smart. The customer was very pleased with the lights & controller. Easy to install with a 35mm 1gang back box. The cover clips on/off easily.