How To Cut & Reconnect LED Tape
Need help with LED Strip Fit? Feel free to send us a drawing or rough sketch of what you want. We can design LED strips of any lengths to suit your exact requirements.
We specialise in supplying complete easy to install kits of any lengths imaginable, ranging from a few millimeters to longer runs, even over 100 metres. If you're looking for bespoke lengths of LED tape for you kitchen cabinets with different cable lengths and output connections, we can arrange everything for you and you'll be pleasantly surprised at how little it all costs.
If you're looking for the very latest version of strip LED tape, we'd recommend COB (Chip on Board) LED tape which produces an amazing, bright and seamless lighting effect. Its self adhesive backing allows it to be stuck to any clean surface and it produces a light output of up to 2000 lumens, that's more than 4x brighter than a 50W halogen, while only consuming 15W per metre!
We can provide expert lighting advice about which LED strip tape to use, which colour temperature and which LED driver or drivers you need. If you want dimmable under cabinet lighting or the option to control from your smartphone, we have dimmable LED drivers and controllers to accommodate any size of project.
Shelves size 114mm each x 6
Wall has 3 shelves on each side of tv what tape and driver would I need please cheers James
This will give you 6x 1125mm lengths. If you position this either in the centre or move it over at one side, it should be fine.
6x 1125mm lengths = 121.5W - the 150W driver would be suitable:
https://www.downlightsdirect.co.uk/mains-dimmable-constant-voltage-led-drivers-150w.html#mains-dimmable-constant-voltage-led-driver-150w-24v
You then need a dimmer switch that can dim this wattage. This module would be fine:
https://www.downlightsdirect.co.uk/zano-led-dimmer-module-150w.html
Also consider how long your input cables need to be.